Item: BRSCHNITT 11pcs/kit Diamond Drills Bits Kit Tile Cutter for Drilling Ceramic Marble Granite
Quantity: 11pcs
Connection:58-11 Thread
Specification:
Drill Bits: Diameter: 6/6/8/25/35/50/75/100mm;Total length 60mm, Diamond height 10mm
Milling Bit: Diameter: 20mm; Total Length: 65mm; Working Length: 50mm
Chamfer Bit: Diameter: 50mm；Total Length: 55mm; Working Length: 46mm
SDS Adapter: Total Length:72mm
Application:
Drills: Suitable for tiles, granite, marble, stone and other.
Chamfer Bit: Used for chamfering, reaming, grinding and polishing of formed holes;
Milling Bit: Enlarges, shapes, or rounds existing holes in ceramics, hard ceramics, marble, and granite; or performs other abrasive work;Please note: Direct drilling is not recommended for this job;
Features:
1.The drilling effect is good, minimize the damage, and the hole edge is smooth with no broken edges;
2.Vacuum brazing technology,high efficiency and faster drilling speed.
3.6-16MM internal wax cooling, waterless dry drilling; wax melts while drilling to lubricate and cool the drilling surface;
4.Chamfer Bite: Fast chamfering and reaming grinding;
5.Milling Bit:3 pairs of 6 water outlets and the hollow design inside the substrate are conducive to radiating the heat generated during operation.
NOTE:
1、Please make sure that all forms of impact or hammering action are switched off;
2、When using the product for chamfering, please operate according to the following instructions: tilt it moderately to reduce the contact surface, do not press it directly with force, and shake it slowly and slightly along with the force, and the amplitude should not be too big.Cannot make holes
